| PRINTER / APPLICATORS |
|
|
|
| |
|
|
|
|
|
|
|
The PA2000 is a powerful accessory for Tharo H-400/H-600 Series thermal transfer/direct thermal bar code label printers. The PA2000 features a smaller footprint, 381mm wide x 813mm tall x 762mm long (15" wide x 32" tall x 30" long), than other Printer/Applicators, with a remote front panel for easy access, regardless of the orientation of the applicator. This allows the PA2000 to be installed in locations where other Printer/Applicators cannot.
»
Options and Accessories
»
Manuals
»
What's New
»
Brochure
|
|
PA2000 SPECIFICATIONS |
|
Minimum Label Size: |
5mm x 5mm (0,20" x 0,20") with specialty tamp |
|
Maximum Label Size: |
152,4mm x 203mm (6" x 8") |
|
Placement Accuracy: |
Stationary: +/- 0,25mm (0,01") or Moving: +/- 3mm (0,125") (for example: conveyor belt applications) |
|
Speed: |
Up to 58 labels per minute* |
|
Weight of Applicator: |
12-17kg (27-37lbs) |
|
Weight of Stand: |
55kg (120 lbs) |
|
Standard Stroke Length: |
432mm (17") total (254mm (10") below table) Custom length cylinders are available upon request. |
|
Air Requirement: |
5 to 6 bar (75 to 90 psi) |
|
Printer Type: |
Tharo H-427, H-436, H-626 or H-634 Direct Thermal or Thermal Transfer Printers |
|
Power Source: |
Switchable: 100V 60Hz or 230V 50Hz |
|
Environmental: |
Temp 10-35�C (50-95�F) at 10-85% humidity |
|
Standards: |
Built to CE safety and emissions standards. RoHS compliant upon request. |
|
* Speeds are approximate.
Product size, label size, printer model and
conveyor speed will determine actual throughput |
|
| |
|
|
| |
PA1200 |
|
|
|
|
|
The PA1200t�s customizable tamp pad comes pre-fitted with a nonstick
plastic surface to suit your labeling needs. This applicator is easy
to use, with minimal adjustments necessary and quick setup and
changeover for applying labels to either the top or side of variable
or common height products.
The PA1200t & PA1200t/b is available for the Datamax (PA1200td & PA1200t/bd) or Zebra (PA1200tz & PA1200t/bz) printers.
»
Options and Accessories
»
Manuals
»
Features
»
Brochure
|
|
| PA1200 SPECIFICATIONS |
| Minimum Label Size: |
76,2mm x 25,4mm (3" x 1") |
| Maximum Label Size: |
10,2mm x 165,1mm (4" x 6,5") |
| Placement Accuracy: |
Stationary: +/- 0,25mm (0,01") or Moving: +/- 3mm (0,125") (for example: conveyor belt applications) |
| Speed: |
Up to 40 labels per minute* |
| Weight of Applicator: |
12kg (27 lbs) |
| Weight of Stand: |
55kg (120 lbs) |
| Standard Stroke Length: |
432mm (17") total (254mm (10") below table) Custom length cylinders are available upon request. |
| Air Requirement: |
5 to 6 bar (75 to 90 psi) |
| Printer Type: |
Datamax I-Class and Zebra Z4MPlus Direct Thermal or Thermal Transfer Printers |
| Power Source: |
Switchable: 100V 60Hz or 230V 50Hz |
| Environmental: |
Temp 10-35°C (50-95°F) at 10-85% humidity |
| Standards: |
Built to CE safety and emissions standards. RoHS compliant upon request. |
| * Speeds are approximate. Product size, label size and conveyor speed will determine actual throughput |
|
| |
|
| |
|
|
|
|
|
|
|
For specialty applications requiring
a label to wrap�around a corner. This applicator can be setup to
wrap onto the front and top of a product or the front and side of
a product. Applies up to 330mm (13") labels in a timely fashion. Why
put two labels on a box if you can get away with just one?
»
Options and Accessories
»
Manuals
»
Features
|
|
|
PA1200CW SPECIFICATIONS |
| Minimum Label Size: |
101,6mm (4") x 101,6mm (4") |
| Maximum Label Size: |
111,8mm (4,4") x 330,2mm (13.0") |
| Placement Accuracy: |
Stationary: +/- 0,25mm (0,01") or Moving: 3mm (+/-0,125") (for example: conveyor belt applications) |
| Speed: |
Up to 15 products per minute* |
| Weight of Applicator: |
17kg (37 lbs) |
| Weight of Stand: |
55kg (120 lbs) |
| Swing Length: |
660,4mm (26") |
| Air Requirement: |
5 to 6 bar (75 to 90 psi) |
| Printer Type: |
Tharo H-Series Direct Thermal or Thermal Transfer Printer |
| Power Source: |
Switchable: 100V 60Hz or 230V 50Hz |
| Environmental: |
Temp 10-35°C (50-95°F) at 10-85% humidity |
| Standards: |
Built to CE safety and emissions standards. RoHS compliant upon request. |
| * Speeds are approximate. Product size, label size and conveyor speed will determine actual throughput |
|
| |
|
| |
|
|
|
|
|
|
|
For specialty applications
requiring a label to be applied
to the front and top of a
product, or the front and side
of a product with one machine.
With extreme accuracy this
machine will do what two
machines have done in the past.
»
Options and Accessories
»
Manuals
»
Features
|
| |
|
PA1200DT SPECIFICATIONS |
| Maximum Label Size: |
111,8mm (4,4") x 203.2mm (8,0") |
| Placement Accuracy: |
Stationary: +/- 0,25mm (0,01") or Moving: +/- 3mm (0,125") (for example: conveyor belt applications) |
| Speed: |
Up to 11 products per minute* |
| Weight of Applicator: |
17kg (37 lbs) |
| Weight of Stand: |
55kg (120 lbs) |
| Swing Length: |
660,4mm (26") |
| Air Requirement: |
5 to 6 bar (75 to 90 psi) |
| Printer Type: |
Tharo H-Series Direct Thermal or Thermal Transfer Printer |
| Power Source: |
Switchable: 100V 60Hz or 230V 50Hz |
| Environmental: |
Temp 10-35°C (50-95°F) at 10-85% humidity |
| Standards: |
Built to CE safety and emissions standards. RoHS compliant upon request. |
| * Speeds are approximate. Product size, label size and conveyor speed will determine actual throughput |
|
| |
|
| |
|
|
|
|
|
|
|
|
|
For specialty applications
requiring the front of a product
to be labeled. The PA1200fa is
accurate and cost effective.
Used to apply a label to the
front of a product where the
orientation of the product
cannot be changed due to product
line constraints.
»
Options and Accessories
»
Manuals
»
Features
|
|
|
PA1200FA SPECIFICATIONS |
| Minimum Label Size: |
76,2mm x 25,4mm (3" x 1 ") |
| Maximum Label Size: |
114mm x 203mm (4,5" x 8,0") |
| Placement Accuracy: |
Stationary: +/- 0,25mm (0,01") or Moving: +/- 3mm (0,125") (for example: conveyor belt applications) |
| Speed: |
Up to 20 products per minute* |
| Weight of Applicator: |
17kg (37 lbs) |
| Weight of Stand: |
55kg (120 lbs) |
| Swing Length: |
660,4mm (26") |
| Air Requirement: |
5 to 6 bar (75 to 90 psi) |
| Printer Type: |
Tharo H-Series Direct Thermal or Thermal Transfer Printer |
| Power Source: |
Switchable: 100V 60Hz or 230V 50Hz |
| Environmental: |
Temp 10-35°C (50-95°F) at 10-85% humidity |
| Standards: |
Built to CE safety and emissions standards. RoHS compliant upon request. |
| * Speeds are approximate. Product size, label size and conveyor speed will determine actual throughput |
|
| |
|
| |
|
|
|
|
|
|
|
With
quick integration and increase
productivity, the PA500w is an
inexpensive solution for your
demanding labeling requirements.
Since the system is electric,
there is no need for compressed
air. The wipe on brush assures
proper application to smooth,
flat surfaces as well as uneven
surfaces.
»
Options and Accessories
»
Features
»
Manuals
»
Brochure
»
Flash Presentation |
| |
|
PA500W SPECIFICATIONS |
| Minimum Label Size: |
76,2mm x 25,4mm (3" x 1") |
| Maximum Label Size: |
114mm x 177,8mm (4,5" x 7,0") |
| Placement Accuracy: |
+/- 3mm (0,125") |
| Speed: |
Over to 100 labels per minute |
| Weight of Applicator w/table: |
9,07kg (20 lbs) |
| Weight of Stand only: |
43kg (95 lbs) |
| Air Requirement: |
None |
| Supply Roll: |
200mm (8") maximum O.D. on cores from 39,9mm to 76,2mm (1,57" to 3") |
| Printer Type: |
Tharo H-Series, or Apollo Direct Thermal or Thermal Transfer Printers |
| Power Source: |
Switchable: 115V 60Hz or 230V 50Hz |
| Environmental: |
Temp 10-35°C (50-95°F) at 10-85% humidity |
| Standards: |
Built to CE safety and emissions standards. RoHS compliant upon request. |
|
|
| |
| |
- Tamp Video
